Glasgow Hackerspace

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
<!DOCTYPE markdown>

# About the Space

Glasgow Hackerspace is currently situated in [Wasps South Block](https://www.waspsstudios.org.uk/space/south-block/). The full address is:

```
Studio 221
60-64 Osbourne Street
Glasgow
G1 5QH
```

{{:about:glasgowhackerspace2.jpeg?400|}}{{ :about:glasgowhackerspace1.jpeg?400|}}

## Access

{{ :about:img_0436.jpg?direct&400|}}

To visit the space, a key-holding member will need to collect you from outside. The door is just to the left of the main entrance to South Block, highlighted in red in the adjacent image. You can write a message in the [discord server](https://discord.gg/b9h36uyssD) when you'd like to be let in.

There is step-free access to the space from Osbourne Street, via lifts. 

South Block is next to a large private car park. On-street parking is available, and free after 6pm.


## Equipment

### Office misc

- Samsung ML-1915 laserjet printer (Debian: `printer-driver-all` package)
- Linux lab computer / desktop PC appliance 

### 3d Printers

- Flashforge Finder

### Electronics

- Atten ST-1509 130W soldering station with various cartridges
- Atten ST-862D 1000W hot air rework station with various nozzles
- Multiple 50+MHz digital oscilloscopes (FIXME: list exact models)
- Sigrok compatible logic analyzers (FIXME: list exact models)
- Various MCU development boards (Arduino, RPi Pico, etc)
- Temperature controllable soldering iron

### Misc

- Hand tools (FIXME: maybe have a 'donations wanted' list with missing but desired ones)
- Lab computer