Differences

This shows you the differences between two versions of the page.

--- projects:meshtastic-node [2025/09/10 21:51] – created kit-ty-kate
+++ projects:meshtastic-node [2025/09/11 00:37] (current) – kit-ty-kate
@@ Line 4: / Line 4: @@
 - Model: [Lilygo T3 S3](https://lilygo.cc/products/t3-s3-meshtastic)
-- 3D printed case: [LilyGo T3 S3 Case by @peteigel_3441119](https://www.printables.com/model/1363530-lilygo-t3-s3-case)
+- 3D printed case: [LilyGo T3 S3 Case by @peteigel_3441119](https://www.printables.com/model/1363530-lilygo-t3-s3-case) with electrical tape temporarily replacing missing M2 screws
 - Node ID: ghac
 - Node name: Glasgow Hackerspace
-{{ :projects:ghac.webp |}}
+{{ :projects:ghac.webp?400 |}}
+## How to connect
+- Download [a Meshtastic app](https://meshtastic.org/docs/software/)
+- **⚠ Make sure the antenna is screwed-in**
+- Plug the USB-C cable in and turn the switch on
+- Make sure no-one else is connected on it already
+- Click on the node over bluetooth.
+  - If this is your first time connecting, it will ask you the code being printed on the node’s screen
+- Enjoy!